Troubleshoot in No Time: Fixing the LG Washer E6 Error (2024)

Have you ever faced an LG Washer E6 error? It can be nerve-racking when your washer starts making unusual sounds. Is it a clutch, motor, or control board issue? Don’t fret – we’re about to solve this LG washer mystery together.

Through this article, you’ll discover the simple solutions to the E6 error. We’ve found it’s usually due to trapped foreign objects, an overheating motor, or a problematic clutch gear assembly. With our easy-to-follow solutions, you’ll be able to get your LG washer humming along perfectly again in no time.

My Experience with LG Washer E6 Error

My two-year washer gave an E6 error and a clutch error.

I run it, and I could hear noises. The wash plates rotate freely as usual.

While it turns, a rapid clicking noise is heard. I wondered what could be the most likely problem:

  • Clutch failure
  • Motor failure
  • or, Control board failure

To be sure that I wasn’t going to buy the extra part, I had to diagnose the clutch gear assembly. My thoughts were that if the gears are broken, the clutch can’t engage.

The best part?

I was able to fix the error. So here’s the way to diagnose the problem.

What Does E6 Error Mean on LG Washer

The E6 error signals overheating or clutch motor error. The LG washer is overheating, and you need to let it cool down. Other instances will mean that the clutch has failed to work correctly.


An object like a coin and other foreign things get stuck between the washer drum and pulsator, triggering the E6 error code.

Therefore, this is a standard error that doesn’t warrant having a service technician look into your washer. Before fixing anything, ensure that you don’t have a false alarm.

At times an LG washer can generate a false alarm which triggers error code E6. To be sure, do the following:

  • Unplug the LG washer from the main electrical socket
  • Wait for ten to twenty minutes
  • Plug the washer again into the power
  • Start the machine

If the machine still shows error code E6, you have the right alarm. And you can move ahead and diagnose it. You can check out other errors here.

How Do I Fix E6 Error on LG Washer?

Check the tank

Troubleshoot in No Time: Fixing the LG Washer E6 Error (1)

Foreign objects get stuck in the tank to block the drum, making it fail to rotate. A jammed washer responds differently.

For example:

  • The washer basket will fail to spin.
  • You’ll hear strange noises coming from the washer.

To solve this, here’s a list of things you can do.

  • Turn the drum with your hand to find out what’s wrong with it
  • Find out if there’s a thin piece of clothing stuck between the basket and the drum
  • Using a pair of flashlights and needle-nose pliers, examine the washer and the drum gap.
  • Get rid of the splash guard to examine the gap properly.
  • Turn the washer basket gently for signs of clothes or hardware stuck in the washer. If you see any, use the needle-nose pliers to remove them.

And there’s more…

A small piece of hardware can slip into the gap between the basket and the tub. It won’t be a surprise to find things like loose change, earbuds, or small wires causing a jam in a washer.

Remove all these objects with a pair of pliers. If you don’t have pliers, I would recommend this one.


The tool feels sturdy and durable. Best of all, you can count on them from fixing any home improvement project including removing objects from your LG washer.

When washing, ensure that all the foreign things causing jam are removed from the clothes.

Check the Motor for Overheating

Troubleshoot in No Time: Fixing the LG Washer E6 Error (2)

Overheating the motor can cause an LG washer e6 error.

The purpose of the main drive motor is to operate the mechanical functions of the LG washer cycles like agitation or tumble and spin.

When there’s a fault with one or many motor-driven electrical components, it causes overheating and creates a burning smell. If the problem continues, it causes the main motor to overheat, making it fail.

One of the symptoms associated with a failing motor is humming or buzzing noises. Here’s how to diagnose the motor:

  • Verify that you have unplugged the washer from the electrical outlet
  • Pull the motor connectors (and not wires) to access the drive motor
  • Using a multimeter, test the motor for continuity and the ground connection. Ensure that your multimeter is set to RX1 for both tests.
  • To perform a continuity test, touch the probes of the motor’s terminals. It would produce a reading that’s nearly zero.
  • To perform a continuity test for ground connection, put one probe on the terminal and the other on the bare metal housing. You won’t receive any reading from this test.
  • If the multimeter reading doesn’t match the above, you have to replace the drive motor.

Check the Clutch Gear Assembly

The clutch gear assembly moves the internal tub of the washer and spins the basket during the spin cycle. The clutch assembly plays a similar role as the clutch in a manual car.

Regular use of the washer makes the clutch prone to damage. If the clutch lining is worn, it won’t rotate properly to release the brake.

The clutch gear assembly consists of the brake cam driver, blue springs for the large washer, a black spring for compact washers, and the installation instructions. Repairing and replacing the clutch is not an easy thing.

I learned the hard way. If you want to fix it, here’s how you can diagnose the problem before buying clutch gears.

  • Start the washer and let it usually run without the clothes
  • Pay attention to how the water fills until the washer tub is full
  • Pay attention to the agitation noise when the washing process begins. If you don’t hear the agitator’s sound, that signals whether the clutch is damaged or broken
  • Allow the washer to complete the cycle and pay attention to how it drains water. Wait until the tub is empty and the tub starts to spin. If the tub fails to rotate, that shows the clutch is broken.
  • Pay attention to the spin action of the washer. You’ll hear intermittent slowness of the wash or spin cycle that signals you have a worn-out or broken clutch.
  • You’ll also hear squeaks coming from the tub during the wash or spin cycle, which signals the clutch is the problem.


If the clutch gear assembly is the problem, you can get one from here.


Experience has taught me that diagnosing the clutch gear assembly is not easy. If your garment is still wet even after the spin cycle, it signals the clutch is about to malfunction.

Sometimes the garment is wet because the spin cycle doesn’t get enough power to get rid of the water. A washer shouldn’t be overheating.

And if it does then something is wrong with the motor or the clutch. We hope this article was detailed enough to shed some light on how you can fix the LG washer error code E6. If you found any challenges, let me know in the comment below so that I can assist you further.

Troubleshoot in No Time: Fixing the LG Washer E6 Error (2024)


Troubleshoot in No Time: Fixing the LG Washer E6 Error? ›

An E6 error code in your washer display indicates an error with the clutch. This can be resolved by removing any objects stuck between the pulsator and the tub.

How to repair error E6? ›

Cookware can be a contributing factor for causing error E6. Cookware for Induction Cooktops needs to be flat, smooth, and have enough iron material to create a strong magnetic pull. If a CI Induction Cooktop shows error code E6, turn the home circuit breaker to the unit off for 30 seconds then back on again.

What causes an E6 error? ›

This can happen for a number of reasons, such as an odd signal, a broken contact, a short circuit, or a wrongly wired connecting wire. An E6 error code can also be caused by a broken transmitting or receiving circuit on either the indoor or outdoor controller circuit board or a faulty fan motor.

How do I get rid of an E6 error on my washing machine? ›

An E6 error code in your washer display indicates an error with the clutch. This can be resolved by removing any objects stuck between the pulsator and the tub.

What is the error code E06 on a washing machine? ›

Due to the constant use, the washing machine can be put under a lot of strain, therefore it's important to be mindful of how you're using it. If your washing machine shows an E06 error code or the power light blinks six times before pausing the fault could lie with an unbalanced load!

What is the error code E6 on a running machine? ›

E6 Error: Controller malfunction. Resolution: Ensure that the cables connecting the console and the controller are secure. If any of the cables/connectors appear loose, completely power off and unplug the treadmill before unplugging and reattaching the cables.

What does refresh failed with error 6 mean? ›

The Error Code 6 means that there was an issue communicating with the Google Play app on the phone (various possible reasons).

What does connection error 6 mean? ›

Error 6 - “System Overflow” means the software is having difficulty connecting to, or reading, a database. Determine when the Error 6 occurs (starting check, closing check, reports, gift cards, etc.) to diagnose which database is being used.

What does E6 mean on induction? ›

When your Philips Induction Cooktop shows error code E5 or E6, this indicates the voltage supply is too high or too low. Your induction cooktop works on standard voltage supply 220V~240V to ensure the optimum performance and longer product life.

What is watchdog error E6? ›

E6 LINE TWO NEUTRAL REVERSED.... ( FOR 50A ONLY) Your Power Watchdog has noticed a very serious condition. The park power has a wire reversed somewhere. This could cause severe damage to your appliances.

How do I force my LG to factory reset? ›

These instructions apply to Android 11 and higher.
  1. Open the Settings app and go to System > Advanced > Reset Options.
  2. Choose Erase all data (factory reset).
  3. Press Erase all data and follow any further instructions to restore your phone to factory settings. 
Oct 8, 2022

What is the most common problem with LG washers? ›

The most common issues with LG washers relate to the washer not draining, wires breaking, or excess water caused by a defective water inlet valve. Read on to troubleshoot the top 3 LG washer problems.

Does unplugging a washer reset it? ›

Reset your washing machine

There really isn't a way to reset the washing machine. What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again.


Top Articles
Latest Posts
Article information

Author: Kelle Weber

Last Updated:

Views: 5888

Rating: 4.2 / 5 (53 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Kelle Weber

Birthday: 2000-08-05

Address: 6796 Juan Square, Markfort, MN 58988

Phone: +8215934114615

Job: Hospitality Director

Hobby: tabletop games, Foreign language learning, Leather crafting, Horseback riding, Swimming, Knapping, Handball

Introduction: My name is Kelle Weber, I am a magnificent, enchanting, fair, joyous, light, determined, joyous person who loves writing and wants to share my knowledge and understanding with you.