- Categories
- Home and Garden
- Home Appliances
- Washing Machines and Dryers
Download Article
Explore this Article
Steps
Steps
Other Sections
Video
Tips and Warnings
Related Articles
References
Co-authored byHomer Flores
Last Updated: May 2, 2024
Download Article
Looking to change the heating element in your dryer? You've come to the right place! Below, you'll find a step-by-step run-through of the process. Scroll down for more.
Get Product Support Solve Any Problem
Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!
*
*
Steps
Download Article
1
Unplug the dryer. Make sure there's no power going to your dryer while you're working.
2
Take off dryer exhaust hose and remove the back panel.[1]
Advertisem*nt
3
Look at the back of the dryer. On the right side, you'll see a long metal (probably gray) housing. The Element is inside.[2]
4
Unscrew the black sensor on top, and unscrew the black sensor on the bottom.[3]
5
Unhook the two wires just below the bottom sensor. (These two sensors could be your problem (in 50% of the cases, it is). Also, there is a heating fuse to your left, under the larger casing on the left. It is about an inch long, and has two wires attached. This can also be your problem. One screw holds it in. If in doubt, take all these to the appliance store, and they'll test them with a voltmeter.)
- Test the heating element with a multimeter by setting it to read continuity. Touch the 2 leads of the heating element with the multimeter. If there isn't any continuity, then you need to replace the element.
6
Gently lift up on the whole gray casing. It should easily come loose. If not, lift a little harder and pull the bottom toward you. There may be a screw and small bracket at the top that needs to be removed. There are some hooks on the bottom that will come loose.
7
Turn it upside down; you'll see one screw holding the element in. Take out the screw, and carefully pull out the element, which is a coil that heats up, on some metal housing. Examine the coil for breaks. If you have a voltmeter, test the element. Also test the Sensors. This will tell you what's broken.
8
Install the new element in the reverse of the above. Replace the element, replace all the sensors and the back panel, as well as the exhaust hose. When done, try it out![4]
Advertisem*nt
Community Q&A
Search
Question
Why won't my dryer turn on after I've replaced the heating element?
Community Answer
There can be quite a few reasons for this. Electric parts may have gotten damaged; a fuse may need a replacement; the protection switch inside the machine may have been triggered; a wall plug fuse may be off...Google for a manual or call your plumber.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 9Helpful 15
Question
I've replaced my heat element coil, but now my fuse keeps blowing. What should I do?
Community Answer
Check to see if you put the heat element coil in properly and that the wires are connected.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 6Helpful 9
Question
Can I do this if it is a gas dryer?
Community Answer
That is a very dangerous task to do on your own. It would be best to Have a professional appliance repair technician do it for you.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 14Helpful 6
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Advertisem*nt
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Submit
Thanks for submitting a tip for review!
Warnings
Unplug the dryer until it's finished.
Thanks
Helpful26Not Helpful19
Advertisem*nt
You Might Also Like
Advertisem*nt
References
About This Article
Co-authored by:
Homer Flores
Appliance Repair Specialist
This article was co-authored by Homer Flores. Homer Flores is an Appliance Repair Specialist and Training Manager at PreFix, a home maintenance company out of Austin, Texas. With over 15 years of experience, Homer specializes in home improvement, remodeling, and construction. Homer’s dedication to the PreFix mission of providing hassle-free one-stop-shop service for home care, in addition to their completion of the Capital Factory and Techstars Accelerators, has contributed to their growth of service to over 50 zip codes throughout the greater Austin area. This article has been viewed 316,580 times.
1 votes - 100%
Co-authors: 8
Updated: May 2, 2024
Views:316,580
Categories: Washing Machines and Dryers
In other languages
Russian
- Send fan mail to authors
Thanks to all authors for creating a page that has been read 316,580 times.
Reader Success Stories
Jack Owen
Oct 12, 2016
"Great instructions. They were accurate and complete. They would have been better if they had explained how to test..." more
Did this article help you?
Advertisem*nt